Bart,
Here is /var/log/dmesg:
Linux version 2.6.27-gentoo-r8 (root@Ottawa) (gcc version 4.1.2 (Gentoo
4.1.2 p1.1)) #2 SMP Sat Mar 7 11:38:24 EST 2009
Command line: real_root=UUID=ad22e35c-021d-46da-95ab-eb662b3e5049
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cfff0000 (usable)
BIOS-e820: 00000000cfff0000 - 00000000cfff3000 (ACPI NVS)
BIOS-e820: 00000000cfff3000 - 00000000d0000000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000e2000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
DMI 2.3 present.
last_pfn = 0x230000 max_arch_pfn = 0x3ffffffff
last_pfn = 0xcfff0 max_arch_pfn = 0x3ffffffff
init_memory_mapping
0000000000 - 00cfe00000 page 2M
00cfe00000 - 00cfff0000 page 4k
kernel direct mapping tables up to cfff0000 @ 8000-e000
last_map_addr: cfff0000 end: cfff0000
init_memory_mapping
0100000000 - 0230000000 page 2M
kernel direct mapping tables up to 230000000 @ c000-16000
last_map_addr: 230000000 end: 230000000
ACPI: RSDP 000F68E0, 0014 (r0 GBT )
ACPI: RSDT CFFF3040, 003C (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
ACPI: FACP CFFF30C0, 0074 (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
ACPI: DSDT CFFF3180, 51B7 (r1 GBT NVDAACPI 1000 MSFT 100000C)
ACPI: FACS CFFF0000, 0040
ACPI: HPET CFFF8480, 0038 (r1 GBT NVDAACPI 42302E31 NVDA 98)
ACPI: MCFG CFFF8500, 003C (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
ACPI: APIC CFFF8380, 0098 (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
ACPI: SSDT CFFF8580, 015C (r1 PmRef Cpu0Ist 3000 INTL 20040311)
ACPI: SSDT CFFF8B30, 0275 (r1 PmRef CpuPm 3000 INTL 20040311)
(6 early reservations) ==> bootmem [0000000000 - 0230000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 -
0000008000]
#2 [0000200000 - 000091dc90] TEXT DATA BSS ==> [0000200000 -
000091dc90]
#3 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 -
0000100000]
#4 [0000008000 - 000000c000] PGTABLE ==> [0000008000 -
000000c000]
#5 [000000c000 - 0000011000] PGTABLE ==> [000000c000 -
0000011000]
found SMP MP-table at [ffff8800000f4f70] 000f4f70
[ffffe20000000000-ffffe20007bfffff] PMD ->
[ffff880028200000-ffff88002fdfffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00230000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x000cfff0
0: 0x00100000 -> 0x00230000
On node 0 totalpages: 2097039
DMA zone: 2012 pages, LIFO batch:0
DMA32 zone: 833576 pages, LIFO batch:31
Normal zone: 1228160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
Allocating PCI resources starting at e4000000 (gap: e2000000:1cc00000)
PERCPU: Allocating 42528 bytes of per cpu data
NR_CPUS: 4, nr_cpu_ids: 4, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063748
Kernel command line: real_root=UUID=ad22e35c-021d-46da-95ab-eb662b3e5049
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 2399.927 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x20000000 - 0x24000000
Memory: 8174020k/9175040k available (4115k kernel code, 213260k reserved,
2176k data, 344k init)
CPA: page pool initialized 1 of 1 pages preallocated
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency..
4799.85 BogoMIPS (lpj=9599708)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20080609
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
Using local APIC timer interrupts.
APIC timer calibration result 16666164
Detected 16.666 MHz APIC timer.
Booting processor 1/3 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4799.91 BogoMIPS
(lpj=9599836)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2/1 ip 6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 4799.88 BogoMIPS
(lpj=9599771)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU2: Thermal monitoring enabled (TM2)
CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3/2 ip 6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 4799.92 BogoMIPS
(lpj=9599858)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU3: Thermal monitoring enabled (TM2)
CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (19199.58 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0,2 level MC
groups: 0 2
domain 1: span 0-3 level CPU
groups: 0,2 1,3
CPU1 attaching sched-domain:
domain 0: span 1,3 level MC
groups: 1 3
domain 1: span 0-3 level CPU
groups: 1,3 0,2
CPU2 attaching sched-domain:
domain 0: span 0,2 level MC
groups: 2 0
domain 1: span 0-3 level CPU
groups: 0,2 1,3
CPU3 attaching sched-domain:
domain 0: span 1,3 level MC
groups: 3 1
domain 1: span 0-3 level CPU
groups: 1,3 0,2
net_namespace: 1152 bytes
xor: automatically using best checksumming function: generic_sse
generic_sse: 8918.000 MB/sec
xor: using function: generic_sse (8918.000 MB/sec)
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 31
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - e1ffffff
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.0: PME# disabled
PCI: 0000:00:0a.1 reg 10 io port: [dd00, dd3f]
PCI: 0000:00:0a.1 reg 20 io port: [1c00, 1c3f]
PCI: 0000:00:0a.1 reg 24 io port: [1c80, 1cbf]
pci 0000:00:0a.1: PME# supported from D3hot D3cold
pci 0000:00:0a.1: PME# disabled
PCI: 0000:00:0b.0 reg 10 32bit mmio: [eb20e000, eb20efff]
pci 0000:00:0b.0: supports D1
pci 0000:00:0b.0: supports D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
PCI: 0000:00:0b.1 reg 10 32bit mmio: [eb204000, eb2040ff]
pci 0000:00:0b.1: supports D1
pci 0000:00:0b.1: supports D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: PME# disabled
PCI: 0000:00:0d.0 reg 20 io port: [f000, f00f]
PCI: 0000:00:0e.0 reg 10 io port: [e200, e207]
PCI: 0000:00:0e.0 reg 14 io port: [e300, e303]
PCI: 0000:00:0e.0 reg 18 io port: [d000, d007]
PCI: 0000:00:0e.0 reg 1c io port: [d100, d103]
PCI: 0000:00:0e.0 reg 20 io port: [d200, d20f]
PCI: 0000:00:0e.0 reg 24 32bit mmio: [eb20b000, eb20bfff]
PCI: 0000:00:0e.1 reg 10 io port: [d300, d307]
PCI: 0000:00:0e.1 reg 14 io port: [d400, d403]
PCI: 0000:00:0e.1 reg 18 io port: [d500, d507]
PCI: 0000:00:0e.1 reg 1c io port: [d600, d603]
PCI: 0000:00:0e.1 reg 20 io port: [d700, d70f]
PCI: 0000:00:0e.1 reg 24 32bit mmio: [eb20c000, eb20cfff]
PCI: 0000:00:0e.2 reg 10 io port: [d800, d807]
PCI: 0000:00:0e.2 reg 14 io port: [d900, d903]
PCI: 0000:00:0e.2 reg 18 io port: [da00, da07]
PCI: 0000:00:0e.2 reg 1c io port: [db00, db03]
PCI: 0000:00:0e.2 reg 20 io port: [dc00, dc0f]
PCI: 0000:00:0e.2 reg 24 32bit mmio: [eb20d000, eb20dfff]
PCI: 0000:00:0f.1 reg 10 32bit mmio: [eb200000, eb203fff]
pci 0000:00:0f.1: PME# supported from D3hot D3cold
pci 0000:00:0f.1: PME# disabled
PCI: 0000:00:11.0 reg 10 32bit mmio: [eb205000, eb205fff]
PCI: 0000:00:11.0 reg 14 io port: [de00, de07]
PCI: 0000:00:11.0 reg 18 32bit mmio: [eb206000, eb2060ff]
PCI: 0000:00:11.0 reg 1c 32bit mmio: [eb207000, eb20700f]
pci 0000:00:11.0: supports D1
pci 0000:00:11.0: supports D2
pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:11.0: PME# disabled
PCI: 0000:00:12.0 reg 10 32bit mmio: [eb208000, eb208fff]
PCI: 0000:00:12.0 reg 14 io port: [df00, df07]
PCI: 0000:00:12.0 reg 18 32bit mmio: [eb209000, eb2090ff]
PCI: 0000:00:12.0 reg 1c 32bit mmio: [eb20a000, eb20a00f]
pci 0000:00:12.0: supports D1
pci 0000:00:12.0: supports D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: PME# disabled
pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PME# disabled
pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:17.0: PME# disabled
PCI: 0000:01:00.0 reg 10 32bit mmio: [e2000000, e2ffffff]
PCI: 0000:01:00.0 reg 14 64bit mmio: [d0000000, dfffffff]
PCI: 0000:01:00.0 reg 1c 64bit mmio: [e3000000, e3ffffff]
PCI: 0000:01:00.0 reg 24 io port: [7000, 707f]
PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
PCI: bridge 0000:00:03.0 io port: [7000, 7fff]
PCI: bridge 0000:00:03.0 32bit mmio: [e2000000, e4ffffff]
PCI: bridge 0000:00:03.0 64bit mmio pref: [d0000000, dfffffff]
PCI: 0000:02:07.0 reg 10 io port: [8000, 80ff]
PCI: 0000:02:07.0 reg 14 64bit mmio: [e6005000, e6005fff]
PCI: 0000:02:07.0 reg 30 32bit mmio: [0, 1ffff]
PCI: 0000:02:0e.0 reg 10 32bit mmio: [e6004000, e60047ff]
PCI: 0000:02:0e.0 reg 14 32bit mmio: [e6000000, e6003fff]
pci 0000:02:0e.0: supports D1
pci 0000:02:0e.0: supports D2
pci 0000:02:0e.0: PME# supported from D0 D1 D2 D3hot
pci 0000:02:0e.0: PME# disabled
pci 0000:00:0f.0: transparent bridge
PCI: bridge 0000:00:0f.0 io port: [8000, 8fff]
PCI: bridge 0000:00:0f.0 32bit mmio: [e5000000, e6ffffff]
PCI: 0000:03:00.0 reg 24 32bit mmio: [eb000000, eb001fff]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.0: PME# disabled
PCI: 0000:03:00.1 reg 10 io port: [9000, 9007]
PCI: 0000:03:00.1 reg 14 io port: [9100, 9103]
PCI: 0000:03:00.1 reg 18 io port: [9200, 9207]
PCI: 0000:03:00.1 reg 1c io port: [9300, 9303]
PCI: 0000:03:00.1 reg 20 io port: [9400, 940f]
PCI: bridge 0000:00:14.0 io port: [9000, 9fff]
PCI: bridge 0000:00:14.0 32bit mmio: [eb000000, eb0fffff]
PCI: 0000:04:00.0 reg 24 32bit mmio: [eb100000, eb101fff]
pci 0000:04:00.0: PME# supported from D3hot
pci 0000:04:00.0: PME# disabled
PCI: 0000:04:00.1 reg 10 io port: [a000, a007]
PCI: 0000:04:00.1 reg 14 io port: [a100, a103]
PCI: 0000:04:00.1 reg 18 io port: [a200, a207]
PCI: 0000:04:00.1 reg 1c io port: [a300, a303]
PCI: 0000:04:00.1 reg 20 io port: [a400, a40f]
PCI: bridge 0000:00:15.0 io port: [a000, afff]
PCI: bridge 0000:00:15.0 32bit mmio: [eb100000, eb1fffff]
PCI: 0000:05:00.0 reg 10 64bit mmio: [e8000000, e8003fff]
PCI: 0000:05:00.0 reg 18 io port: [b000, b0ff]
PCI: 0000:05:00.0 reg 30 32bit mmio: [0, 1ffff]
pci 0000:05:00.0: supports D1
pci 0000:05:00.0: supports D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
PCI: bridge 0000:00:16.0 io port: [b000, bfff]
PCI: bridge 0000:00:16.0 32bit mmio: [e7000000, e8ffffff]
PCI: 0000:06:00.0 reg 10 64bit mmio: [ea000000, ea003fff]
PCI: 0000:06:00.0 reg 18 io port: [c000, c0ff]
PCI: 0000:06:00.0 reg 30 32bit mmio: [0, 1ffff]
pci 0000:06:00.0: supports D1
pci 0000:06:00.0: supports D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PME# disabled
PCI: bridge 0000:00:17.0 io port: [c000, cfff]
PCI: bridge 0000:00:17.0 32bit mmio: [e9000000, eaffffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LSA2] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 1
system 00:01: ioport range 0x1000-0x107f has been reserved
system 00:01: ioport range 0x1080-0x10ff has been reserved
system 00:01: ioport range 0x1400-0x147f has been reserved
system 00:01: ioport range 0x1480-0x14ff has been reserved
system 00:01: ioport range 0x1800-0x187f has been reserved
system 00:01: ioport range 0x1880-0x18ff has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x800-0x87f has been reserved
system 00:02: ioport range 0x295-0x295 has been reserved
system 00:02: ioport range 0x290-0x294 has been reserved
system 00:02: ioport range 0x880-0x88f has been reserved
system 00:09: iomem range 0xe0000000-0xe1ffffff could not be reserved
system 00:0a: iomem range 0xd6000-0xd7fff has been reserved
system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved
system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
system 00:0a: iomem range 0xfc000-0xfffff could not be reserved
system 00:0a: iomem range 0xcfff0000-0xcfffffff could not be reserved
system 00:0a: iomem range 0xffff0000-0xffffffff could not be reserved
system 00:0a: iomem range 0x0-0x9ffff could not be reserved
system 00:0a: iomem range 0x100000-0xcffeffff could not be reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
pci 0000:00:03.0: IO window: 0x7000-0x7fff
pci 0000:00:03.0: MEM window: 0xe2000000-0xe4ffffff
pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:0f.0: PCI bridge, secondary bus 0000:02
pci 0000:00:0f.0: IO window: 0x8000-0x8fff
pci 0000:00:0f.0: MEM window: 0xe5000000-0xe6ffffff
pci 0000:00:0f.0: PREFETCH window: 0x000000eb300000-0x000000eb3fffff
pci 0000:00:14.0: PCI bridge, secondary bus 0000:03
pci 0000:00:14.0: IO window: 0x9000-0x9fff
pci 0000:00:14.0: MEM window: 0xeb000000-0xeb0fffff
pci 0000:00:14.0: PREFETCH window: disabled
pci 0000:00:15.0: PCI bridge, secondary bus 0000:04
pci 0000:00:15.0: IO window: 0xa000-0xafff
pci 0000:00:15.0: MEM window: 0xeb100000-0xeb1fffff
pci 0000:00:15.0: PREFETCH window: disabled
pci 0000:00:16.0: PCI bridge, secondary bus 0000:05
pci 0000:00:16.0: IO window: 0xb000-0xbfff
pci 0000:00:16.0: MEM window: 0xe7000000-0xe8ffffff
pci 0000:00:16.0: PREFETCH window: 0x000000eb400000-0x000000eb4fffff
pci 0000:00:17.0: PCI bridge, secondary bus 0000:06
pci 0000:00:17.0: IO window: 0xc000-0xcfff
pci 0000:00:17.0: MEM window: 0xe9000000-0xeaffffff
pci 0000:00:17.0: PREFETCH window: 0x000000eb500000-0x000000eb5fffff
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:0f.0: setting latency timer to 64
pci 0000:00:14.0: setting latency timer to 64
pci 0000:00:15.0: setting latency timer to 64
pci 0000:00:16.0: setting latency timer to 64
pci 0000:00:17.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 01 index 0 io port: [7000, 7fff]
bus: 01 index 1 mmio: [e2000000, e4ffffff]
bus: 01 index 2 mmio: [d0000000, dfffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [8000, 8fff]
bus: 02 index 1 mmio: [e5000000, e6ffffff]
bus: 02 index 2 mmio: [eb300000, eb3fffff]
bus: 02 index 3 io port: [0, ffff]
bus: 02 index 4 mmio: [0, ffffffffffffffff]
bus: 03 index 0 io port: [9000, 9fff]
bus: 03 index 1 mmio: [eb000000, eb0fffff]
bus: 03 index 2 mmio: [0, 0]
bus: 03 index 3 mmio: [0, 0]
bus: 04 index 0 io port: [a000, afff]
bus: 04 index 1 mmio: [eb100000, eb1fffff]
bus: 04 index 2 mmio: [0, 0]
bus: 04 index 3 mmio: [0, 0]
bus: 05 index 0 io port: [b000, bfff]
bus: 05 index 1 mmio: [e7000000, e8ffffff]
bus: 05 index 2 mmio: [eb400000, eb4fffff]
bus: 05 index 3 mmio: [0, 0]
bus: 06 index 0 io port: [c000, cfff]
bus: 06 index 1 mmio: [e9000000, eaffffff]
bus: 06 index 2 mmio: [eb500000, eb5fffff]
bus: 06 index 3 mmio: [0, 0]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
IA-32 Microcode Update Driver: v1.14a <tigran [ at ] aivazian [ dot ] fsnet [ dot ] co [ dot ] uk>
HugeTLB registered 2 MB page size, pre-allocated 0 pages
Installing knfsd (copyright (C) 1996 okir [ at ] monad [ dot ] swb [ dot ] de).
fuse init (API version 7.9)
msgmni has been set to 15966
async_tx: api initialized (sync-only)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:03.0: Disabling HT MSI mapping<6>pci 0000:00:0e.0: Disabling HT
MSI mapping<6>pci 0000:00:0e.1: Disabling HT MSI mapping<6>pci 0000:00:0e.2:
Disabling HT MSI mapping<6>pci 0000:00:0f.0: Disabling HT MSI mapping<6>pci
0000:00:0f.1: Disabling HT MSI mapping<6>pci 0000:00:11.0: Disabling HT MSI
mapping<6>pci 0000:00:12.0: Disabling HT MSI mapping<6>pci 0000:00:14.0:
Disabling HT MSI mapping<6>pci 0000:00:15.0: Disabling HT MSI mapping<6>pci
0000:00:16.0: Disabling HT MSI mapping<6>pci 0000:00:17.0: Disabling HT MSI
mapping<7>pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:03.0: setting latency timer to 64
pcieport-driver 0000:00:03.0: found MSI capability
pci_express 0000:00:03.0:pcie00: allocate port service
pci_express 0000:00:03.0:pcie03: allocate port service
pcieport-driver 0000:00:14.0: setting latency timer to 64
pcieport-driver 0000:00:14.0: found MSI capability
pci_express 0000:00:14.0:pcie00: allocate port service
pci_express 0000:00:14.0:pcie03: allocate port service
pcieport-driver 0000:00:15.0: setting latency timer to 64
pcieport-driver 0000:00:15.0: found MSI capability
pci_express 0000:00:15.0:pcie00: allocate port service
pci_express 0000:00:15.0:pcie03: allocate port service
pcieport-driver 0000:00:16.0: setting latency timer to 64
pcieport-driver 0000:00:16.0: found MSI capability
pci_express 0000:00:16.0:pcie00: allocate port service
pci_express 0000:00:16.0:pcie03: allocate port service
pcieport-driver 0000:00:17.0: setting latency timer to 64
pcieport-driver 0000:00:17.0: found MSI capability
pci_express 0000:00:17.0:pcie00: allocate port service
pci_express 0000:00:17.0:pcie03: allocate port service
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.103
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
processor ACPI0007:00: registered as cooling_device0
ACPI: SSDT CFFF8980, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311)
processor ACPI0007:01: registered as cooling_device1
ACPI: SSDT CFFF8A10, 0087 (r1 PmRef Cpu2Ist 3000 INTL 20040311)
processor ACPI0007:02: registered as cooling_device2
ACPI: SSDT CFFF8AA0, 0087 (r1 PmRef Cpu3Ist 3000 INTL 20040311)
processor ACPI0007:03: registered as cooling_device3
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
brd: module loaded
loop: module loaded
Ethernet Channel Bonding Driver: v3.3.0 (June 10, 2008)
bonding: Warning: either miimon or arp_interval and arp_ip_target module
parameters must be specified, otherwise bonding will not detect link
failures! see bonding.txt for details.
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
forcedeth 0000:00:11.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) ->
IRQ 23
forcedeth 0000:00:11.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
forcedeth 0000:00:11.0: ifname eth0, PHY OUI 0x5043 @ 1, addr
00:1a:4d:4d:10:22
forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi
desc-v3
ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 22
forcedeth 0000:00:12.0: PCI INT A -> Link[AMC1] -> GSI 22 (level, low) ->
IRQ 22
forcedeth 0000:00:12.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
forcedeth 0000:00:12.0: ifname eth1, PHY OUI 0x5043 @ 2, addr
00:1a:4d:4d:10:24
forcedeth 0000:00:12.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi
desc-v3
Loading iSCSI transport class v2.0-870.
st: Version 20080504, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
SCSI Media Changer driver v0.25
Driver 'ch' needs updating - please use bus_type methods
sata_nv 0000:00:0e.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ
21
sata_nv 0000:00:0e.0: Using SWNCQ mode
sata_nv 0000:00:0e.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0xe200 ctl 0xe300 bmdma 0xd200 irq 21
ata2: SATA max UDMA/133 cmd 0xd000 ctl 0xd100 bmdma 0xd208 irq 21
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-H62L, DL00, max UDMA/100
ata1.00: configured for UDMA/100
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: HPA detected: current 625140335, native 625142448
ata2.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata2.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H62L DL00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 625140335 512-byte hardware sectors (320072 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 1:0:0:0: [sda] 625140335 512-byte hardware sectors (320072 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sda: sda1 sda2 sda3
sd 1:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: Attached scsi generic sg1 type 0
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
sata_nv 0000:00:0e.1: PCI INT B -> Link[APSJ] -> GSI 20 (level, low) -> IRQ
20
sata_nv 0000:00:0e.1: Using SWNCQ mode
sata_nv 0000:00:0e.1: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xd300 ctl 0xd400 bmdma 0xd700 irq 20
ata4: SATA max UDMA/133 cmd 0xd500 ctl 0xd600 bmdma 0xd708 irq 20
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: ST3750640AS, 3.AAE, max UDMA/133
ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: ST3750640AS, 3.AAE, max UDMA/133
ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST3750640AS 3.AA PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 2:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sdb: sdb1 sdb2
sd 2:0:0:0: [sdb] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg2 type 0
scsi 3:0:0:0: Direct-Access ATA ST3750640AS 3.AA PQ: 0 ANSI: 5
sd 3:0:0:0: [sdc] 1465149168 512-byte hardware sectors (750156 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 3:0:0:0: [sdc] 1465149168 512-byte hardware sectors (750156 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sdc: sdc1 sdc2
sd 3:0:0:0: [sdc] Attached SCSI disk
sd 3:0:0:0: Attached scsi generic sg3 type 0
ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23
sata_nv 0000:00:0e.2: PCI INT C -> Link[ASA2] -> GSI 23 (level, low) -> IRQ
23
sata_nv 0000:00:0e.2: Using SWNCQ mode
sata_nv 0000:00:0e.2: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0xd800 ctl 0xd900 bmdma 0xdc00 irq 23
ata6: SATA max UDMA/133 cmd 0xda00 ctl 0xdb00 bmdma 0xdc08 irq 23
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-7: ST3750640AS, 3.AAE, max UDMA/133
ata5.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-7: ST3750640AS, 3.AAD, max UDMA/133
ata6.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA ST3750640AS 3.AA PQ: 0 ANSI: 5
sd 4:0:0:0: [sdd] 1465149168 512-byte hardware sectors (750156 MB)
sd 4:0:0:0: [sdd] Write Protect is off
sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 4:0:0:0: [sdd] 1465149168 512-byte hardware sectors (750156 MB)
sd 4:0:0:0: [sdd] Write Protect is off
sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sdd: sdd1 sdd2
sd 4:0:0:0: [sdd] Attached SCSI disk
sd 4:0:0:0: Attached scsi generic sg4 type 0
scsi 5:0:0:0: Direct-Access ATA ST3750640AS 3.AA PQ: 0 ANSI: 5
sd 5:0:0:0: [sde] 1465149168 512-byte hardware sectors (750156 MB)
sd 5:0:0:0: [sde] Write Protect is off
sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 5:0:0:0: [sde] 1465149168 512-byte hardware sectors (750156 MB)
sd 5:0:0:0: [sde] Write Protect is off
sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sde: sde1 sde2
sd 5:0:0:0: [sde] Attached SCSI disk
sd 5:0:0:0: Attached scsi generic sg5 type 0
pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
pata_jmicron 0000:03:00.1: PCI INT B -> Link[APC6] -> GSI 16 (level, low) ->
IRQ 16
pata_jmicron 0000:03:00.1: setting latency timer to 64
scsi6 : pata_jmicron
scsi7 : pata_jmicron
ata7: PATA max UDMA/100 cmd 0x9000 ctl 0x9100 bmdma 0x9400 irq 16
ata8: PATA max UDMA/100 cmd 0x9200 ctl 0x9300 bmdma 0x9408 irq 16
pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001)
ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
pata_jmicron 0000:04:00.1: PCI INT B -> Link[APC5] -> GSI 16 (level, low) ->
IRQ 16
pata_jmicron 0000:04:00.1: setting latency timer to 64
scsi8 : pata_jmicron
scsi9 : pata_jmicron
ata9: PATA max UDMA/100 cmd 0xa000 ctl 0xa100 bmdma 0xa400 irq 16
ata10: PATA max UDMA/100 cmd 0xa200 ctl 0xa300 bmdma 0xa408 irq 16
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ohci1394 0000:02:0e.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ
19
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e6004000-e60047ff]
Max Packet=[2048] IR/IT contexts=[4/8]
ieee1394: raw1394: /dev/raw1394 device initialized
aoe: AoE v47 initialised.
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ
22
ehci_hcd 0000:00:0b.1: setting latency timer to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.1: debug port 1
ehci_hcd 0000:00:0b.1: cache line size of 32 is not supported
ehci_hcd 0000:00:0b.1: irq 22, io mem 0xeb204000
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ
21
ohci_hcd 0000:00:0b.0: setting latency timer to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0b.0: irq 21, io mem 0xeb20e000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
USB Universal Host Controller Interface driver v3.0
Initializing USB Mass Storage driver...
usb 2-8: new low speed USB device using ohci_hcd and address 2
usb 2-8: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input2
i2c /dev entries driver
ieee1394: Host added: ID:BUS[0-00:1023] GUID[001a4d0000c788c1]
input: ImExPS/2 Generic Explorer Mouse as /class/input/input3
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
coretemp coretemp.2: Using relative temperature scale!
coretemp coretemp.3: Using relative temperature scale!
it87: Found IT8718F chip at 0x290, revision 2
it87: in3 is VCC (+5V)
it87 it87.656: Failed to request region 0x295-0x296
it87: probe of it87.656 failed with error -16
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int64x1 2033 MB/s
raid6: int64x2 2791 MB/s
raid6: int64x4 3121 MB/s
raid6: int64x8 1928 MB/s
raid6: sse2x1 3876 MB/s
raid6: sse2x2 4345 MB/s
raid6: sse2x4 7083 MB/s
raid6: using algorithm sse2x4 (7083 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
dm-devel [ at ] redhat [ dot ] com
oprofile: using NMI interrupt.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
registered taskstats version 1
md: Autodetecting RAID arrays.
md: Scanned 4 and added 4 devices.
md: autorun ...
md: considering sde2 ...
md: adding sde2 ...
md: adding sdd2 ...
md: adding sdc2 ...
md: adding sdb2 ...
md: created md0
md: bind<sdb2>
md: bind<sdc2>
md: bind<sdd2>
md: bind<sde2>
md: running: <sde2><sdd2><sdc2><sdb2>
raid5: device sde2 operational as raid disk 3
raid5: device sdd2 operational as raid disk 2
raid5: device sdc2 operational as raid disk 1
raid5: device sdb2 operational as raid disk 0
raid5: not enough operational devices for md0 (3/7 failed)
RAID5 conf printout:
--- rd:7 wd:4
disk 0, o:1, dev:sdb2
disk 1, o:1, dev:sdc2
disk 2, o:1, dev:sdd2
disk 3, o:1, dev:sde2
raid5: failed to run raid set md0
md: pers->run() failed ...
md: do_md_run() returned -5
md: md0 still in use.
md: ... autorun DONE.
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block
18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: replayed 744 transactions in 2 seconds
ReiserFS: sda2: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 344k freed
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c80
ahci 0000:03:00.0: version 3.0
ahci 0000:03:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:03:00.0: setting latency timer to 64
scsi10 : ahci
scsi11 : ahci
ata11: SATA max UDMA/133 abar m8192@0xeb000000 port 0xeb000100 irq 16
ata12: SATA max UDMA/133 abar m8192@0xeb000000 port 0xeb000180 irq 16
nvidia: module license 'NVIDIA' taints kernel.
ata11: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata11.00: ATA-7: ST3750640AS, 3.AAE, max UDMA/133
ata11.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata11.00: configured for UDMA/133
ata12: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata12.00: ATA-8: ST3750330AS, SD15, max UDMA/133
ata12.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata12.00: configured for UDMA/133
scsi 10:0:0:0: Direct-Access ATA ST3750640AS 3.AA PQ: 0 ANSI:
5
sd 10:0:0:0: [sdf] 1465149168 512-byte hardware sectors (750156 MB)
sd 10:0:0:0: [sdf] Write Protect is off
sd 10:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 10:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 10:0:0:0: [sdf] 1465149168 512-byte hardware sectors (750156 MB)
sd 10:0:0:0: [sdf] Write Protect is off
sd 10:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 10:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdf: sdf1 sdf2
sd 10:0:0:0: [sdf] Attached SCSI disk
sd 10:0:0:0: Attached scsi generic sg6 type 0
scsi 11:0:0:0: Direct-Access ATA ST3750330AS SD15 PQ: 0 ANSI:
5
sd 11:0:0:0: [sdg] 1465149168 512-byte hardware sectors (750156 MB)
sd 11:0:0:0: [sdg] Write Protect is off
sd 11:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 11:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 11:0:0:0: [sdg] 1465149168 512-byte hardware sectors (750156 MB)
sd 11:0:0:0: [sdg] Write Protect is off
sd 11:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 11:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdg: sdg1 sdg2
sd 11:0:0:0: [sdg] Attached SCSI disk
sd 11:0:0:0: Attached scsi generic sg7 type 0
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
aic7xxx 0000:02:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ
17
ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
ahci 0000:04:00.0: PCI INT A -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16
ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:04:00.0: setting latency timer to 64
scsi12 : ahci
scsi13 : ahci
ata13: SATA max UDMA/133 abar m8192@0xeb100000 port 0xeb100100 irq 16
ata14: SATA max UDMA/133 abar m8192@0xeb100000 port 0xeb100180 irq 16
ata13: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata13.00: ATA-7: ST3750640AS, 3.AAE, max UDMA/133
ata13.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata13.00: configured for UDMA/133
ata14: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata14.00: ATA-8: ST3750330AS, SD15, max UDMA/133
ata14.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata14.00: configured for UDMA/133
scsi 12:0:0:0: Direct-Access ATA ST3750640AS 3.AA PQ: 0 ANSI:
5
sd 12:0:0:0: [sdh] 1465149168 512-byte hardware sectors (750156 MB)
sd 12:0:0:0: [sdh] Write Protect is off
sd 12:0:0:0: [sdh] Mode Sense: 00 3a 00 00
sd 12:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 12:0:0:0: [sdh] 1465149168 512-byte hardware sectors (750156 MB)
sd 12:0:0:0: [sdh] Write Protect is off
sd 12:0:0:0: [sdh] Mode Sense: 00 3a 00 00
sd 12:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdh: sdh1 sdh2
sd 12:0:0:0: [sdh] Attached SCSI disk
sd 12:0:0:0: Attached scsi generic sg8 type 0
scsi 13:0:0:0: Direct-Access ATA ST3750330AS SD15 PQ: 0 ANSI:
5
sd 13:0:0:0: [sdi] 1465149168 512-byte hardware sectors (750156 MB)
sd 13:0:0:0: [sdi] Write Protect is off
sd 13:0:0:0: [sdi] Mode Sense: 00 3a 00 00
sd 13:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 13:0:0:0: [sdi] 1465149168 512-byte hardware sectors (750156 MB)
sd 13:0:0:0: [sdi] Write Protect is off
sd 13:0:0:0: [sdi] Mode Sense: 00 3a 00 00
sd 13:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdi: sdi1 sdi2
sd 13:0:0:0: [sdi] Attached SCSI disk
sd 13:0:0:0: Attached scsi generic sg9 type 0
scsi14 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec 29160 Ultra160 SCSI adapter>
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
HDA Intel 0000:00:0f.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) ->
IRQ 20
HDA Intel 0000:00:0f.1: setting latency timer to 64
nvidia 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ
16
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 177.82 Tue Nov 4 16:50:05
PST 2008
ReiserFS: sda2: Removing [570094 8726447 0x0 SD]..done
ReiserFS: sda2: Removing [30553 6649316 0x0 SD]..done
ReiserFS: sda2: Removing [30437 580080 0x0 SD]..done
ReiserFS: sda2: There were 3 uncompleted unlinks/truncates. Completed
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
ReiserFS: sda3: using ordered data mode
ReiserFS: sda3: journal params: device sda3, size 8192, journal first block
18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda3: checking transaction log (sda3)
ReiserFS: sda3: Using r5 hash to sort names
ReiserFS: md0: warning: sh-2006: read_super_block: bread failed (dev md0,
block 2, size 4096)
ReiserFS: md0: warning: sh-2006: read_super_block: bread failed (dev md0,
block 16, size 4096)
ReiserFS: md0: warning: sh-2021: reiserfs_fill_super: can not find reiserfs
on md0
Adding 1606460k swap on /dev/sdb1. Priority:1 extents:1 across:1606460k
Adding 1606460k swap on /dev/sdc1. Priority:1 extents:1 across:1606460k
Adding 1606460k swap on /dev/sdd1. Priority:1 extents:1 across:1606460k
Adding 1606460k swap on /dev/sde1. Priority:1 extents:1 across:1606460k
Adding 1606460k swap on /dev/sdf1. Priority:1 extents:1 across:1606460k
Adding 1606460k swap on /dev/sdg1. Priority:1 extents:1 across:1606460k
Adding 1606460k swap on /dev/sdh1. Priority:1 extents:1 across:1606460k
Adding 1606460k swap on /dev/sdi1. Priority:1 extents:1 across:1606460k
I do not have any config* file in my /boot directory.
Thanks!
Charles
On Thu, Mar 19, 2009 at 8:03 PM, Bart Trojanowski <bart-oclug [ at ] jukie [ dot ] net>wrote:
> * Charles Nadeau <charles [ dot ] nadeau [ at ] gmail [ dot ] com> [090319 19:56]:
> > Since upgrading from 2.6.25r7 to 2.6.27r8 my RAID-5 array doesn't come up
> > correctly at boot time. Only the first 4 of the 8 drives appear as
> members
> > of the array at boot time. I have to add the last 4 manually before
> starting
> > the array. As far as I am concerned, nothing changed in my kernel's
> .config
> > file between the 2 versions of the kernel. Here is what my array looks
> like:
>
> Please include the contents of /var/log/dmesg and your
> /boot/config-2.6.27r8
>
> -Bart
>
> --
> WebSig: http://www.jukie.net/~bart/sig/<http://www.jukie.net/%7Ebart/sig/>
>
--
Charles Nadeau Ph.D.
http://charlesnadeau.blogspot.com/
http://radio.weblogs.com/0111823/