home | list info | list archive | date index | thread index

Re: Thunderbolt support under Linux for external displays

Jun 23, 2026 08:23:45 Jean-Francois Messier via linux <linux [ at ] linux-ottawa [ dot ] org>:

I recently got myself an MSI Cubi B206 mini computer after looking at
major specs.

Question 1:

I overlooked the number of HDMI ports on the back. I have two monitors
and I only got one port on the model I chose. I was thinking about using
one of those cheap HDMI adapters that connect to USB 3 ports. I got one
that was working fine, but is now unused.

Talking with other geeks, I also thought I could use one of two
Thunderbolt ports I have on the back. I also understand there are cables
that will go directly from the Thunderbolt USB-C connector to the HDMI
connector.

Looking at the PDF doc of my specific model, I see that I have two ports
that "Support up to 8K display." Those are identified as "Thunderbolt 4
Port (USB Type-C)"

Before spending more money on this, I was looking to see how good is the
support of Thunderbolt for external displays under Linux. I use Linux
Mint 22.3 right now.

Question 2:

After some challenges in getting Linux Mint installed, mainly caused by
the setup for the start on USB port, I got Mint 22.3 installed. However,
when shutting it down, be it form the menu or the command line, reboot
or shutdown, I get error message about PCI Bus error ("Recoverable")
scrolling forever, never turning the device actually off. I do not have
the exact port numbers in note. When I turn it off by the power button
and restart it, everything is fine, but that's a bugger.

Any idea what setting I should change, either in the BIOS setup

Thanks !


Jean-Francois Messier



To unsubscribe send a blank message to linux+unsubscribe [ at ] linux-ottawa [ dot ] org
To get help send a blank message to linux+help [ at ] linux-ottawa [ dot ] org
To visit the archives: https://lists.linux-ottawa.org

Can you boot a different district from USB just to see if the pci error still happens.

To unsubscribe send a blank message to linux+unsubscribe [ at ] linux-ottawa [ dot ] org
To get help send a blank message to linux+help [ at ] linux-ottawa [ dot ] org
To visit the archives: https://lists.linux-ottawa.org