I rebooted, and this time no errors and sound came up, but in shutting
down the previous session, the system hung, and I had to use the RESET
switch to gothe re-boot going ..
Does this mean my computer is geting flakey on me ...
This time fewer stange messages in DMESG:
linux:~ # dmesg
Linux version 2.6.13-15-default (geeko@buildhost) (gcc version 4.0.2
20050901 (prerelease) (SUSE Linux)) #1 Tue Sep 13 14:56:15 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001bff0000 (usable)
BIOS-e820: 000000001bff0000 - 000000001bff8000 (ACPI data)
BIOS-e820: 000000001bff8000 - 000000001c000000 (ACPI NVS)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
447MB LOWMEM available.
On node 0 totalpages: 114672
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 110576 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fc390
ACPI: RSDT (v001 AMIINT SiS730SX 0x00001000 MSFT 0x0100000b) @ 0x1bff0000
ACPI: FADT (v001 AMIINT SiS730SX 0x00001000 MSFT 0x0100000b) @ 0x1bff0030
ACPI: DSDT (v001 SiS 730S 0x00000100 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0x5008
ACPI: local apic disabled
Allocating PCI resources starting at 1c000000 (gap: 1c000000:e3fc0000)
Built 1 zonelists
Kernel command line: root=/dev/hda2 vga=0x31a selinux=0
resume=/dev/hda1 splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1260.133 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 448976k/458688k available (2028k kernel code, 9120k reserved,
700k data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2521.68 BogoMIPS
(lpj=5043373)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000
00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000020 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: AMD Duron(tm) stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 1747k freed
ACPI: Looking for DSDT in initrd... not found!
not found!
ACPI: setting ELCR to 0200 (from 0828)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
Uncovering SIS18 that hid as a SIS503 (compatible=0)
Enabling SiS 96x SMBus.
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
TC classifier action (bugs to netdev [ at ] vger [ dot ] kernel [ dot ] org cc hadi [ at ] cyberus [ dot ] ca)
PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
PCI: Bridge: 0000:00:02.0
IO window: b000-bfff
MEM window: dfe00000-dfefffff
PREFETCH window: cfc00000-dfcfffff
PCI: Setting latency timer of device 0000:00:02.0 to 64
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1155502277.136:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xd0000000, mapped to 0xdc880000, using 10240k,
total 65472k
vesafb: mode is 1280x1024x16, linelength=2560, pages=2
vesafb: protected mode interface info at cbca:0004
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size
112645 bytes,<6>...found (1280x1024, 17839 bytes, v3).
Console: switching to colour frame buffer device 158x59
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
input: PC Speaker
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.38
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Using IPI Shortcut mode
ACPI wakeup devices:
PCI0 PS2M PS2K UAR1 USB1 USB2 LAN MDM AUD SLPB
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 204k freed
logips2pp: Detected unknown logitech mouse model 1
input: PS/2 Logitech Mouse on isa0060/serio1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:00.1
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS730 ATA 100 (1st gen) controller
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: WDC WD800JB-00JJC0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63,
UDMA(100)
hda: cache flushes supported
hda: hda1 hda2
Probing IDE interface ide1...
hdc: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU1] (supports 8 throttling states)
hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Attempting manual resume
swsusp: Suspend partition has wrong signature?
ReiserFS: hda2: found reiserfs format "3.6" with standard journal
ReiserFS: hda2: using ordered data mode
ReiserFS: hda2: journal params: device hda2, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: hda2: checking transaction log (hda2)
ReiserFS: hda2: Using r5 hash to sort names
spurious 8259A interrupt: IRQ7.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Adding 907632k swap on /dev/hda1. Priority:-1 extents:1
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel [ at ] redhat [ dot ] com
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
lp0: using parport0 (interrupt-driven).
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:01.2[D] -> Link [LNKD] -> GSI 5 (level, low)
-> IRQ 5
ohci_hcd 0000:00:01.2: OHCI Host Controller
ohci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:01.2: irq 5, io mem 0xdfffc000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:01.3[D] -> Link [LNKD] -> GSI 5 (level, low)
-> IRQ 5
ohci_hcd 0000:00:01.3: OHCI Host Controller
ohci_hcd 0000:00:01.3: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:01.3: irq 5, io mem 0xdfffd000
sis900.c: v1.08.08 Jan. 22 2005
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:01.1[C] -> Link [LNKC] -> GSI 3 (level, low)
-> IRQ 3
0000:00:01.1: VIA 6103 PHY transceiver found at address 1.
0000:00:01.1: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 3, 00:0a:e6:c8:4d:ea.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected SiS 730 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:01.4[B] -> Link [LNKB] -> GSI 11 (level,
low) -> IRQ 11
ALSA sound/pci/ac97/ac97_codec.c:1959: AC'97 1 does not respond - RESET
ALSA sound/pci/ac97/ac97_codec.c:2001: AC'97 1 access error (not audio
or modem codec)
ALSA sound/pci/trident/trident_main.c:2992: SI7018: the secondary codec
- invalid access
gameport: Trident 4DWave is pci0000:00:01.4/gameport0, speed 2130kHz
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
mtrr: 0xd0000000,0x4000000 overlaps existing 0xd0000000,0x2000000
[drm] Initialized drm 1.0.0 20040925
sis: module not supported by Novell, setting U taint flag.
[drm] Initialized sis 1.1.0 20030826 on minor 0:
mtrr: 0xd0000000,0x4000000 overlaps existing 0xd0000000,0x2000000
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
NET: Registered protocol family 17
ALSA sound/pci/trident/trident_main.c:156: ac97 codec read TIMEOUT
[0x5a/0x1000c05a]!!!
eth0: Media Link On 100mbps full-duplex
NET: Registered protocol family 10
Disabled Privacy Extensions on device c036b920(lo)
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWBX]
ACPI: Sleep Button (CM) [SLPB]
IA-32 Microcode Update Driver: v1.14 <tigran [ at ] veritas [ dot ] com>
microcode: CPU0 not a capable Intel processor
microcode: No new microcode data for CPU0
IA-32 Microcode Update Driver v1.14 unregistered
powernow-k8: Processor cpuid 671 not supported
subfs 0.9
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
subfs: unsuccessful attempt to mount media (256)
eth0: no IPv6 routers present
linux:~ #
Charles MacDonald wrote:
> My sound did not work this morning, and KDE gave me a warning that power
> management was not working.
>
> Dmesg has some strange messages updating the CPU???
> This is Suse 10.
> What's Happening?
>
> linux:~ # dmesg
> Linux version 2.6.13-15-default (geeko@buildhost) (gcc version 4.0.2
> 20050901 (prerelease) (SUSE Linux)) #1 Tue Sep 13 14:56:15 UTC 2005
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001bff0000 (usable)
> BIOS-e820: 000000001bff0000 - 000000001bff8000 (ACPI data)
> BIOS-e820: 000000001bff8000 - 000000001c000000 (ACPI NVS)
> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
> 0MB HIGHMEM available.
> 447MB LOWMEM available.
> On node 0 totalpages: 114672
> DMA zone: 4096 pages, LIFO batch:1
> Normal zone: 110576 pages, LIFO batch:31
> HighMem zone: 0 pages, LIFO batch:1
> DMI 2.3 present.
> ACPI: RSDP (v000 AMI ) @ 0x000fc390
> ACPI: RSDT (v001 AMIINT SiS730SX 0x00001000 MSFT 0x0100000b) @ 0x1bff0000
> ACPI: FADT (v001 AMIINT SiS730SX 0x00001000 MSFT 0x0100000b) @ 0x1bff0030
> ACPI: DSDT (v001 SiS 730S 0x00000100 MSFT 0x0100000b) @ 0x00000000
> ACPI: PM-Timer IO Port: 0x5008
> ACPI: local apic disabled
> Allocating PCI resources starting at 1c000000 (gap: 1c000000:e3fc0000)
> Built 1 zonelists
> Kernel command line: root=/dev/hda2 vga=0x31a selinux=0
> resume=/dev/hda1 splash=silent
> bootsplash: silent mode.
> Initializing CPU#0
> PID hash table entries: 2048 (order: 11, 32768 bytes)
> Detected 1260.133 MHz processor.
> Using pmtmr for high-res timesource
> Console: colour dummy device 80x25
> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Memory: 448976k/458688k available (2028k kernel code, 9120k reserved,
> 700k data, 204k init, 0k highmem)
> Checking if this processor honours the WP bit even in supervisor mode... Ok.
> Calibrating delay using timer specific routine.. 2521.74 BogoMIPS
> (lpj=5043486)
> Security Framework v1.0.0 initialized
> SELinux: Disabled at boot.
> Mount-cache hash table entries: 512
> CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000
> 00000000 00000000 00000000
> CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000
> 00000000 00000000 00000000
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 64K (64 bytes/line)
> CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000020 00000000
> 00000000 00000000
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> mtrr: v2.0 (20020519)
> CPU: AMD Duron(tm) stepping 01
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> checking if image is initramfs... it is
> Freeing initrd memory: 1747k freed
> ACPI: Looking for DSDT in initrd... not found!
> not found!
> ACPI: setting ELCR to 0200 (from 0828)
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
> PCI: Using configuration type 1
> ACPI: Subsystem revision 20050408
> ACPI: Interpreter enabled
> ACPI: Using PIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
> Uncovering SIS18 that hid as a SIS503 (compatible=0)
> Enabling SiS 96x SMBus.
> Boot video device is 0000:01:00.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: Power Resource [URP1] (off)
> ACPI: Power Resource [URP2] (off)
> ACPI: Power Resource [FDDP] (off)
> ACPI: Power Resource [LPTP] (off)
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> pnp: PnP ACPI: found 11 devices
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
> report
> TC classifier action (bugs to netdev [ at ] vger [ dot ] kernel [ dot ] org cc hadi [ at ] cyberus [ dot ] ca)
> PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
> PCI: Bridge: 0000:00:02.0
> IO window: b000-bfff
> MEM window: dfe00000-dfefffff
> PREFETCH window: cfc00000-dfcfffff
> PCI: Setting latency timer of device 0000:00:02.0 to 64
> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
> apm: overridden by ACPI.
> audit: initializing netlink socket (disabled)
> audit(1155482479.528:1): initialized
> Total HugeTLB memory allocated, 0
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> Initializing Cryptographic API
> vesafb: framebuffer at 0xd0000000, mapped to 0xdc880000, using 10240k,
> total 65472k
> vesafb: mode is 1280x1024x16, linelength=2560, pages=2
> vesafb: protected mode interface info at cbca:0004
> vesafb: scrolling: redraw
> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
> bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size
> 112645 bytes,<6>...found (1280x1024, 17839 bytes, v3).
> Console: switching to colour frame buffer device 158x59
> fb0: VESA VGA frame buffer device
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Real Time Clock Driver v1.12
> PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
> serio: i8042 AUX port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
> loop: loaded (max 8 devices)
> mice: PS/2 mouse device common for all mice
> input: PC Speaker
> md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
> md: bitmap version 3.38
> NET: Registered protocol family 2
> input: AT Translated Set 2 keyboard on isa0060/serio0
> IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
> TCP established hash table entries: 16384 (order: 5, 131072 bytes)
> TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
> TCP: Hash tables configured (established 16384 bind 16384)
> TCP reno registered
> NET: Registered protocol family 1
> Using IPI Shortcut mode
> ACPI wakeup devices:
> PCI0 PS2M PS2K UAR1 USB1 USB2 LAN MDM AUD SLPB
> ACPI: (supports S0 S1 S4 S5)
> Freeing unused kernel memory: 204k freed
> logips2pp: Detected unknown logitech mouse model 1
> input: PS/2 Logitech Mouse on isa0060/serio1
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> SIS5513: IDE controller at PCI slot 0000:00:00.1
> SIS5513: chipset revision 208
> SIS5513: not 100% native mode: will probe irqs later
> SIS5513: SiS730 ATA 100 (1st gen) controller
> ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
> ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
> Probing IDE interface ide0...
> hda: WDC WD800JB-00JJC0, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hda: max request size: 128KiB
> hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63,
> UDMA(100)
> hda: cache flushes supported
> hda: hda1 hda2
> Probing IDE interface ide1...
> hdc: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
> ide1 at 0x170-0x177,0x376 on irq 15
> ACPI: CPU0 (power states: C1[C1] C2[C2])
> ACPI: Processor [CPU1] (supports 8 throttling states)
> hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.20
> Attempting manual resume
> swsusp: Suspend partition has wrong signature?
> ReiserFS: hda2: found reiserfs format "3.6" with standard journal
> ReiserFS: hda2: using ordered data mode
> ReiserFS: hda2: journal params: device hda2, size 8192, journal first
> block 18, max trans len 1024, max batch 900, max commit age 30, max
> trans age 30
> ReiserFS: hda2: checking transaction log (hda2)
> ReiserFS: hda2: Using r5 hash to sort names
> bootsplash: status on console 0 changed to on
> spurious 8259A interrupt: IRQ7.
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> Adding 907632k swap on /dev/hda1. Priority:-1 extents:1
> device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel [ at ] redhat [ dot ] com
> parport: PnPBIOS parport detected.
> parport0: PC-style at 0x378 (0x778), irq 7, dma 3
> [PCSPP,TRISTATE,COMPAT,ECP,DMA]
> lp0: using parport0 (interrupt-driven).
> sis900.c: v1.08.08 Jan. 22 2005
> ACPI-0212: *** Warning: Device is not power manageable
> ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3
> PCI: setting IRQ 3 as level-triggered
> ACPI: PCI Interrupt 0000:00:01.1[C] -> Link [LNKC] -> GSI 3 (level, low)
> -> IRQ 3
> 0000:00:01.1: VIA 6103 PHY transceiver found at address 1.
> 0000:00:01.1: Using transceiver found at address 1 as default
> eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 3, 00:0a:e6:c8:4d:ea.
> Linux agpgart interface v0.101 (c) Dave Jones
> agpgart: Detected SiS 730 chipset
> agpgart: AGP aperture is 64M @ 0xe0000000
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
> ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
> PCI: setting IRQ 5 as level-triggered
> ACPI: PCI Interrupt 0000:00:01.2[D] -> Link [LNKD] -> GSI 5 (level, low)
> -> IRQ 5
> ohci_hcd 0000:00:01.2: OHCI Host Controller
> ohci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
> ohci_hcd 0000:00:01.2: irq 5, io mem 0xdfffc000
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 3 ports detected
> ACPI: PCI Interrupt 0000:00:01.3[D] -> Link [LNKD] -> GSI 5 (level, low)
> -> IRQ 5
> ohci_hcd 0000:00:01.3: OHCI Host Controller
> ohci_hcd 0000:00:01.3: new USB bus registered, assigned bus number 2
> ohci_hcd 0000:00:01.3: irq 5, io mem 0xdfffd000
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 3 ports detected
> ACPI-0212: *** Warning: Device is not power manageable
> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
> PCI: setting IRQ 11 as level-triggered
> ACPI: PCI Interrupt 0000:00:01.4[B] -> Link [LNKB] -> GSI 11 (level,
> low) -> IRQ 11
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> ALSA sound/pci/ac97/ac97_codec.c:1959: AC'97 1 does not respond - RESET
> ALSA sound/pci/ac97/ac97_codec.c:2001: AC'97 1 access error (not audio
> or modem codec)
> ALSA sound/pci/trident/trident_main.c:2992: SI7018: the secondary codec
> - invalid access
> gameport: Trident 4DWave is pci0000:00:01.4/gameport0, speed 2209kHz
> shpchp: shpc_init : shpc_cap_offset == 0
> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
> mtrr: 0xd0000000,0x4000000 overlaps existing 0xd0000000,0x2000000
> [drm] Initialized drm 1.0.0 20040925
> sis: module not supported by Novell, setting U taint flag.
> [drm] Initialized sis 1.1.0 20030826 on minor 0:
> mtrr: 0xd0000000,0x4000000 overlaps existing 0xd0000000,0x2000000
> agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
> agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
> agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
> NET: Registered protocol family 17
> ALSA sound/pci/trident/trident_main.c:156: ac97 codec read TIMEOUT
> [0x5a/0x1000c05a]!!!
> eth0: Media Link On 100mbps full-duplex
> NET: Registered protocol family 10
> Disabled Privacy Extensions on device c036b920(lo)
> IPv6 over IPv4 tunneling driver
> eth0: no IPv6 routers present
> ACPI: Power Button (FF) [PWRF]
> ACPI: Power Button (CM) [PWBX]
> ACPI: Sleep Button (CM) [SLPB]
> IA-32 Microcode Update Driver: v1.14 <tigran [ at ] veritas [ dot ] com>
> microcode: CPU0 not a capable Intel processor
> microcode: No new microcode data for CPU0
> IA-32 Microcode Update Driver v1.14 unregistered
> powernow-k8: Processor cpuid 671 not supported
> subfs 0.9
> end_request: I/O error, dev fd0, sector 0
> end_request: I/O error, dev fd0, sector 0
> end_request: I/O error, dev fd0, sector 0
> end_request: I/O error, dev fd0, sector 0
> subfs: unsuccessful attempt to mount media (256)
> linux:~ #
--
Charles MacDonald Stittsville Ontario
cmacd [ at ] TelecomOttawa [ dot ] net Just Beyond the Fringe
http://www.TelecomOttawa.net/~cmacd/
No Microsoft Products were used in sending this e-mail.